Protech Zoom 400 Operations Instructions download pdf (Page 157)

Saving and Loading Lens Files

157

Chapter 7 Saving and Loading User Setting Data

3 To execute the load, select “Execute,”

and then press the MENU knob.

To cancel the load, select “Cancel,” and

then press the MENU knob.

If you select “Execute,” a list box of lens files

appears. File numbers where “No File” is

displayed are empty file numbers.

4 Select the desired file number, and then

press the MENU knob.

A confirmation message appears.

5 To execute the load, select “Execute,”

and then press the MENU knob.

To cancel the load, select “Cancel,” and

then press the MENU knob.

If you selected “Lens Recall SxS” in step 2,

the ACCESS lamp lights when you execute

the load (in blue on the right-side panel and

in orange in the card slot section).

When the specified lens file has been loaded

from the SxS memory card, a completion

message appears and the ACCESS lamp goes

out.

When you are using a lens that support serial

communication, you can set up the camcorder by

automatically loading the lens file that

corresponds to the lens settings (Lens Auto Recall

function).

To use the Lens Auto Recall function, set “FILE”

> “Lens” > “Lens Auto Recall” in the setup menu

to one of the following.

On: Load the lens file that corresponds to the

model name.

Off: Do not use the Lens Auto Recall function.

Serial Number: Load the lens file that

corresponds to the model name and serial

number (when the lens supports

communication of the serial number).

If the lens does not support communication of the

serial number, both settings load the lens file that

corresponds to the model name.

Loading Lens Files Automatically

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 194 195

Comments to this Manuals

No comments

Protech Zoom 400 Operations Instructions Page 157

Comments to this Manuals