Protech Zoom 400 Operations Instructions Page 39
- Page / 195
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Preparing the Audio Input System
39
Chapter 2 Preparations
You can connect up to two monaural
microphones to the AUDIO IN CH-1/CH-2
connectors, using an optional CAC-12
Microphone Holder.
The following is the procedure for attaching an
electret condenser microphone such as the ECM-
674/678.
On how to attach the CAC-12, refer to the operation
manual for the CAC-12.
1 Attach the electret condenser
microphone.
1 Loosen the ball joint lock lever.
2 Wind the microphone spacer (sheet
type, supplied with the microphone)
around the microphone, while peeling
off the protective sheets on both sides
of the microphone spacer.
3 Place the microphone in the holder so
that “UP” is at the top.
4 Close the microphone holder.
5 Tighten the screw.
6 Position so that the microphone does
not interfere with the viewfinder and
tighten the ball joint lock lever.
2 Connect the microphone cable to the
AUDIO IN CH-1 or CH-2 connector.
3 Set the switches as follows.
• Set the AUDIO IN selectors indicated
below, depending on the power supply type
of the microphone.
Internal power supply: MIC
External power supply: +48V
• Set the AUDIO IN CH1/CH2 switch for the
channel to which the microphone is
connected to REAR.
4 Switch the input level to match the
sensitivity of the microphone used.
Switch the input level by changing the setting of
“MAINTENANCE” > “Audio” > “Rear MIC
CH1/CH2 Ref” in the setup menu (factory
default setting is “–60 dB”). For details, see
page 131.
Connecting Microphones to the
AUDIO IN Connectors
Microphone
1 AUDIO IN selectors
2 Monaural microphone
3 AUDIO IN CH1/CH2 switches
4 To AUDIO IN CH-1 or CH-2 connector
- Solid-State Memory 1
- Camcorder 1
- Table of Contents 2
- Chapter 4 : Shooting 4
- Chapter 5 : Clip Operations 5
- Chapter 9 : Maintenance 6
- Foreword 8
- 1 Overview 9
- Features 10
- Chapter 1 Overview 10
- Locations and Functions 11
- Accessory Attachments 12
- Right side (near the front) 14
- Right side (near the rear) 16
- Left side and upper section 19
- Monochrome LCD Panel 21
- Viewfinder 24
- Viewfinder Screen 25
- White” setting (see 26
- White” is greater than 26
- Bottom of viewfinder screen 27
- 2 Preparations 29
- Attaching the Viewfinder 30
- Chapter 2 Preparations 31
- Using the BKW-401 Viewfinder 33
- Rotation Bracket 33
- Setting the Area of Use 35
- Setting the Date/Time of 35
- Mounting and Adjusting 36
- Carrying out the adjustment 37
- Preparing the Audio 38
- Input System 38
- AUDIO IN Connectors 39
- Tripod Mounting 41
- Connecting a Video 41
- Using the Shoulder 42
- Adjusting the Shoulder 42
- Pad Position 42
- 3 Adjustments and Settings 43
- In FAT mode 44
- Adjusting the Black 45
- Balance and the White 45
- Adjusting the White Balance 46
- 2 and 3 as required 47
- 3 Repeat step 2 as required 48
- Shutter Speed 49
- Changing the Reference 50
- Value for Automatic Iris 50
- Adjustment 50
- Switching between Zoom Modes 51
- Using Manual Zoom 51
- Using Servo Zoom 51
- Adjusting the Focus 52
- Adjusting the Audio 53
- Setting the Time Data 54
- Setting the User Bits 55
- Synchronizing the Timecode 55
- 1 Turn on the POWER switch 56
- 2 Set the PRESET/REGEN/CLOCK 56
- Checking Camcorder 57
- Settings and Status 57
- Information (Status 57
- Screens) 57
- 3 Close the cover 58
- Restoring SxS Memory Cards 60
- Using a Media Adaptor 61
- Operating via the 62
- REMOTE Connector 62
- Operating the Menu from the 64
- Using a Wi-Fi Adapter 76
- Using the Web Menu 78
- Using Live Logging Functions 79
- Using the Wi-Fi Remote 79
- Commander 79
- Basic Operations 80
- Advanced Operations 83
- Recording Time-lapse Video 84
- (Interval Rec Function) 84
- (Frame Rec Function) 85
- Chapter 4 Shooting 86
- Mix Function 87
- Planning Metadata 88
- 5 Clip Operations 91
- Playing Clips 92
- Using Thumbnails to Search 93
- Inside Clips 93
- Thumbnail Operations 95
- Basic THUMBNAIL Menu 97
- Displaying Clip Properties 98
- Adding/Deleting the OK Mark 99
- (FAT-HD Mode Only) 99
- Copying Clips 99
- Deleting Clips 100
- Screen (UDF and FAT-HD Mode 100
- S1 S2 S2 S1 101
- To add shot marks 102
- To delete shot marks 102
- Menu and Detailed Settings 103
- Basic Setup Menu 104
- Operations 104
- Basic Setup Menu Operations 105
- To enter text 106
- To cancel the setting change 106
- To exit the menu 106
- Menu List 107
- Makes settings related 109
- Selects the items to 116
- PAINT Menu 123
- MAINTENANCE Menu 129
- Wi-Fi Remote 142
- “Disable.” 142
- FILE Menu 144
- 4 Press the MENU knob 153
- Loading Setting Data 154
- Contents 154
- Saving and Loading 155
- Scene Files 155
- Lens Files 156
- Saving and Loading Lens Files 157
- Connecting External Devices 158
- HDMI connector 159
- VIDEO OUT connector 159
- SxS PRO 8GB 160
- To remove an SxS memory card 161
- 3 Start recording 162
- 3 Start the recording 163
- Configuring a Shooting 164
- 9 Maintenance 165
- Operation Warnings 166
- Warning Indication 167
- Recording continues 171
- 1) (B) for the card in slot B 172
- Appendix 173
- Important Notes on Operation 174
- Exchanging the Battery 175
- Specifications 179
- Audio Block 180
- Media Block 180
- Inputs/Outputs 180
- Lens Block (PMW-400K Only) 181
- Supplied Accessories 181
- Recommended Additional 181
- Equipment 181
- Dimensions 182
- About i.LINK 185
- MPEG-2 Video Patent 186
- Portfolio License 186
- About Bitmap Fonts 186
- About OpenSSL 187
- About JQuery,Sizzle.js 190
© 2020, manymanuals.com. All rights reserved. | 0.209 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals