Protech Zoom 400 Operations Instructions Page 26
- Page / 195
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Viewfinder Screen Display
26
Chapter 1 Overview
g Wireless receiver reception level
When a wireless receiver is installed in the
camcorder, “W” appears together with four
segment reception level indicators for each of the
channels (1 to 4) that can be used by the receiver.
The indications are as follows.
In normal situation: The number of white
segments indicates the strength of the signal
level.
Muting (for an analog receiver) or error rate
aggravation (for a digital receiver): The
number of gray segments indicates the
strength of the signal level.
Reception level over peak: “P” is displayed
instead of the indicators.
1)
Tuner battery is low: The channel number and
indicator of the corresponding channel
flash.
1)
1) When an optional DWR-S01D is used
h Battery remaining/voltage capacity
i External power input
Appears when power is supplied from an external
power source connected to the DC IN connector.
j Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 1.5 K to 50.0 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the “Offset White” setting (see
page 119).
No display: “Offset White” is “Off.”
+: The value of “Offset White” is greater than
3200K.
–: The value of “Offset White” is less than
3200K.
k Number of system lines
Indicates the number of system lines (1080/720/
576/480) of video currently being recorded or
played back.
l Video format
Indicates the video format (see page 43).
The video aspect ratio (16:9 or 4:3) can also be
displayed when the recording format is set to
DVCAM.
m Depth of field indication (when the
serial lens is mounted)
Error/warning indication
A bar indicates the depth of field. The display unit
is meters or feet, as selected on “OPERATION”
> “Display On/Off” > “Lens Info” in the setup
menu.
An error or warning message is displayed here
depending on the situation.
Under this area, you can also display the name of
the next clip to be recorded (see page 122).
n Special recording mode indication
The following is displayed when the camcorder is
in a special recording mode.
• Frame Rec (Frame Recording mode)
• Interval Rec (Interval Recording mode)
• S&Q Motion (Slow & Quick Motion mode)
o Special recording mode settings
indication
Appears when the camcorder is in a special
recording mode.
Type of power
source
What is displayed
InfoLithium
battery
Remaining battery capacity icon
and remaining recording time
Anton Bauer
battery
Remaining battery capacity (%
indication)
Other type than
above
Input voltage
- Solid-State Memory 1
- Camcorder 1
- Table of Contents 2
- Chapter 4 : Shooting 4
- Chapter 5 : Clip Operations 5
- Chapter 9 : Maintenance 6
- Foreword 8
- 1 Overview 9
- Features 10
- Chapter 1 Overview 10
- Locations and Functions 11
- Accessory Attachments 12
- Right side (near the front) 14
- Right side (near the rear) 16
- Left side and upper section 19
- Monochrome LCD Panel 21
- Viewfinder 24
- Viewfinder Screen 25
- White” setting (see 26
- White” is greater than 26
- Bottom of viewfinder screen 27
- 2 Preparations 29
- Attaching the Viewfinder 30
- Chapter 2 Preparations 31
- Using the BKW-401 Viewfinder 33
- Rotation Bracket 33
- Setting the Area of Use 35
- Setting the Date/Time of 35
- Mounting and Adjusting 36
- Carrying out the adjustment 37
- Preparing the Audio 38
- Input System 38
- AUDIO IN Connectors 39
- Tripod Mounting 41
- Connecting a Video 41
- Using the Shoulder 42
- Adjusting the Shoulder 42
- Pad Position 42
- 3 Adjustments and Settings 43
- In FAT mode 44
- Adjusting the Black 45
- Balance and the White 45
- Adjusting the White Balance 46
- 2 and 3 as required 47
- 3 Repeat step 2 as required 48
- Shutter Speed 49
- Changing the Reference 50
- Value for Automatic Iris 50
- Adjustment 50
- Switching between Zoom Modes 51
- Using Manual Zoom 51
- Using Servo Zoom 51
- Adjusting the Focus 52
- Adjusting the Audio 53
- Setting the Time Data 54
- Setting the User Bits 55
- Synchronizing the Timecode 55
- 1 Turn on the POWER switch 56
- 2 Set the PRESET/REGEN/CLOCK 56
- Checking Camcorder 57
- Settings and Status 57
- Information (Status 57
- Screens) 57
- 3 Close the cover 58
- Restoring SxS Memory Cards 60
- Using a Media Adaptor 61
- Operating via the 62
- REMOTE Connector 62
- Operating the Menu from the 64
- Using a Wi-Fi Adapter 76
- Using the Web Menu 78
- Using Live Logging Functions 79
- Using the Wi-Fi Remote 79
- Commander 79
- Basic Operations 80
- Advanced Operations 83
- Recording Time-lapse Video 84
- (Interval Rec Function) 84
- (Frame Rec Function) 85
- Chapter 4 Shooting 86
- Mix Function 87
- Planning Metadata 88
- 5 Clip Operations 91
- Playing Clips 92
- Using Thumbnails to Search 93
- Inside Clips 93
- Thumbnail Operations 95
- Basic THUMBNAIL Menu 97
- Displaying Clip Properties 98
- Adding/Deleting the OK Mark 99
- (FAT-HD Mode Only) 99
- Copying Clips 99
- Deleting Clips 100
- Screen (UDF and FAT-HD Mode 100
- S1 S2 S2 S1 101
- To add shot marks 102
- To delete shot marks 102
- Menu and Detailed Settings 103
- Basic Setup Menu 104
- Operations 104
- Basic Setup Menu Operations 105
- To enter text 106
- To cancel the setting change 106
- To exit the menu 106
- Menu List 107
- Makes settings related 109
- Selects the items to 116
- PAINT Menu 123
- MAINTENANCE Menu 129
- Wi-Fi Remote 142
- “Disable.” 142
- FILE Menu 144
- 4 Press the MENU knob 153
- Loading Setting Data 154
- Contents 154
- Saving and Loading 155
- Scene Files 155
- Lens Files 156
- Saving and Loading Lens Files 157
- Connecting External Devices 158
- HDMI connector 159
- VIDEO OUT connector 159
- SxS PRO 8GB 160
- To remove an SxS memory card 161
- 3 Start recording 162
- 3 Start the recording 163
- Configuring a Shooting 164
- 9 Maintenance 165
- Operation Warnings 166
- Warning Indication 167
- Recording continues 171
- 1) (B) for the card in slot B 172
- Appendix 173
- Important Notes on Operation 174
- Exchanging the Battery 175
- Specifications 179
- Audio Block 180
- Media Block 180
- Inputs/Outputs 180
- Lens Block (PMW-400K Only) 181
- Supplied Accessories 181
- Recommended Additional 181
- Equipment 181
- Dimensions 182
- About i.LINK 185
- MPEG-2 Video Patent 186
- Portfolio License 186
- About Bitmap Fonts 186
- About OpenSSL 187
- About JQuery,Sizzle.js 190
© 2020, manymanuals.com. All rights reserved. | 0.854 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals