Protech Zoom 400 Operations Instructions Page 54
- Page / 195
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Setting the Time Data
54
Chapter 3 Adjustments and Settings
Selecting the recorded audio
You can select the audio recorded on audio
channels 3 and 4 with the AUDIO IN CH3/CH4
switches.
You can have the selection made automatically,
as follows.
To automatically select the same audio as on
channels 1 and 2
Set “MAINTENANCE” > “Audio” > “Audio
CH3/4 Mode” of the setup menu to “Ch 1/2.”
Adjusting the audio recording levels
To adjust automatically
Set the AUDIO SELECT CH 3-4 switch to
AUTO.
To adjust manually
1 Set the AUDIO SELECT CH 3-4 switch
to MANUAL.
2 Select the knobs that adjust the audio
levels with the Audio CH3 Level and
Audio CH4 Level items under
“MAINTENANCE” > “Audio” in the
setup menu.
Audio CH3 Level: Channel 3 recording
level (see page 133)
Audio CH4 Level: Channel 4 recording
level (see page 133)
You can now adjust the levels of audio channels
3 and 4 with the knobs selected here.
Note
When picture cache mode is enabled, it is not possible to
set time data, even if you set the F-RUN/SET/R-RUN
switch to SET. If you want to set time data, first exit
picture cache mode.
The timecode setting range is from 00 : 00 : 00 :
00 to 23 : 59 : 59 : 29 (hours : minutes : seconds :
frames).
1 Set the DISPLAY switch to TC.
2 Set the PRESET/REGEN/CLOCK
switch to PRESET.
3 Set the F-RUN/SET/R-RUN switch to
SET.
The first (leftmost) digit of timecode flashes.
4 Use the up and down arrow buttons to
change values, and use the left and right
arrow buttons to move the flashing
digit. Repeat until all digits are set.
To reset the timecode value to 00:00:00:00
Press the RESET/RETURN button.
5 Set the F-RUN/SET/R-RUN switch to
F-RUN or R-RUN.
F-RUN: Free run. The timecode generator
keeps running.
R-RUN: Recording run. The timecode
generator runs only while recording.
To set the drop frame mode/non-drop frame
mode
You can select the drop frame (DF) mode or non-
drop frame (NDF) mode on MAINTENANCE
>Timecode in the setup menu.
Recording Audio on Channels 3
and 4
CH3 switch Channel 3 recording target
FRONT Front microphone audio
REAR Audio signal input to AUDIO IN
CH-1 connector
WIRELESS Wireless microphone audio
CH4 switch Channel 4 recording target
FRONT Front microphone audio
REAR Audio signal input to AUDIO IN
CH-2 connector
WIRELESS Wireless microphone audio
Setting the Time Data
Setting the Timecode
- Solid-State Memory 1
- Camcorder 1
- Table of Contents 2
- Chapter 4 : Shooting 4
- Chapter 5 : Clip Operations 5
- Chapter 9 : Maintenance 6
- Foreword 8
- 1 Overview 9
- Features 10
- Chapter 1 Overview 10
- Locations and Functions 11
- Accessory Attachments 12
- Right side (near the front) 14
- Right side (near the rear) 16
- Left side and upper section 19
- Monochrome LCD Panel 21
- Viewfinder 24
- Viewfinder Screen 25
- White” setting (see 26
- White” is greater than 26
- Bottom of viewfinder screen 27
- 2 Preparations 29
- Attaching the Viewfinder 30
- Chapter 2 Preparations 31
- Using the BKW-401 Viewfinder 33
- Rotation Bracket 33
- Setting the Area of Use 35
- Setting the Date/Time of 35
- Mounting and Adjusting 36
- Carrying out the adjustment 37
- Preparing the Audio 38
- Input System 38
- AUDIO IN Connectors 39
- Tripod Mounting 41
- Connecting a Video 41
- Using the Shoulder 42
- Adjusting the Shoulder 42
- Pad Position 42
- 3 Adjustments and Settings 43
- In FAT mode 44
- Adjusting the Black 45
- Balance and the White 45
- Adjusting the White Balance 46
- 2 and 3 as required 47
- 3 Repeat step 2 as required 48
- Shutter Speed 49
- Changing the Reference 50
- Value for Automatic Iris 50
- Adjustment 50
- Switching between Zoom Modes 51
- Using Manual Zoom 51
- Using Servo Zoom 51
- Adjusting the Focus 52
- Adjusting the Audio 53
- Setting the Time Data 54
- Setting the User Bits 55
- Synchronizing the Timecode 55
- 1 Turn on the POWER switch 56
- 2 Set the PRESET/REGEN/CLOCK 56
- Checking Camcorder 57
- Settings and Status 57
- Information (Status 57
- Screens) 57
- 3 Close the cover 58
- Restoring SxS Memory Cards 60
- Using a Media Adaptor 61
- Operating via the 62
- REMOTE Connector 62
- Operating the Menu from the 64
- Using a Wi-Fi Adapter 76
- Using the Web Menu 78
- Using Live Logging Functions 79
- Using the Wi-Fi Remote 79
- Commander 79
- Basic Operations 80
- Advanced Operations 83
- Recording Time-lapse Video 84
- (Interval Rec Function) 84
- (Frame Rec Function) 85
- Chapter 4 Shooting 86
- Mix Function 87
- Planning Metadata 88
- 5 Clip Operations 91
- Playing Clips 92
- Using Thumbnails to Search 93
- Inside Clips 93
- Thumbnail Operations 95
- Basic THUMBNAIL Menu 97
- Displaying Clip Properties 98
- Adding/Deleting the OK Mark 99
- (FAT-HD Mode Only) 99
- Copying Clips 99
- Deleting Clips 100
- Screen (UDF and FAT-HD Mode 100
- S1 S2 S2 S1 101
- To add shot marks 102
- To delete shot marks 102
- Menu and Detailed Settings 103
- Basic Setup Menu 104
- Operations 104
- Basic Setup Menu Operations 105
- To enter text 106
- To cancel the setting change 106
- To exit the menu 106
- Menu List 107
- Makes settings related 109
- Selects the items to 116
- PAINT Menu 123
- MAINTENANCE Menu 129
- Wi-Fi Remote 142
- “Disable.” 142
- FILE Menu 144
- 4 Press the MENU knob 153
- Loading Setting Data 154
- Contents 154
- Saving and Loading 155
- Scene Files 155
- Lens Files 156
- Saving and Loading Lens Files 157
- Connecting External Devices 158
- HDMI connector 159
- VIDEO OUT connector 159
- SxS PRO 8GB 160
- To remove an SxS memory card 161
- 3 Start recording 162
- 3 Start the recording 163
- Configuring a Shooting 164
- 9 Maintenance 165
- Operation Warnings 166
- Warning Indication 167
- Recording continues 171
- 1) (B) for the card in slot B 172
- Appendix 173
- Important Notes on Operation 174
- Exchanging the Battery 175
- Specifications 179
- Audio Block 180
- Media Block 180
- Inputs/Outputs 180
- Lens Block (PMW-400K Only) 181
- Supplied Accessories 181
- Recommended Additional 181
- Equipment 181
- Dimensions 182
- About i.LINK 185
- MPEG-2 Video Patent 186
- Portfolio License 186
- About Bitmap Fonts 186
- About OpenSSL 187
- About JQuery,Sizzle.js 190
© 2020, manymanuals.com. All rights reserved. | 0.331 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals